Product Description
HN-01-3500563-0001 Hughes 9502 M2M IP Terminal, IDU Indoor Unit
Hughes 9502 M2M IP Terminal
Interfaces
• Ethernet
• USB
• RS232 serial interface (DB9 male, DTE) to external NMEA 0183 based GNSS device (e.g., GLONASS receiver).This port cannot be used for serial data
• SIM Card
• TNC-Female type RF connector(for Cable to ODU)
• DC input, 2-line power connector
• Audio Jack, 3.5mm(for audio tone or voltage level to assist in ODU pointing)
Operation Interface / LED
• Function(User) Button
• LED – Power
• LED – BGAN Satellite Network
• LED – GPS Satellite
Mounting Profiles
The IDU can be mounted using the:
IDU strap (P/N 3500617-0001) if desired Strap will require 4 each mounting bolts either M3.5 or 6/32” (not included).
The Indoor unit (IDU) is housed inside building or NEMA 4x Enclosure / the remote terminal unit (RTU), NOT included.
Optional Accessories – NOT included in this “IDU Terminal ONLY” pack
Part# HN-01-3500638-0001, ODU External Flat Panel Antenna
Part# HN-01-3500638-0001, RF Cable 10m(32.4ft) Antenna cable, terminated with N Connectors
Part# HN-01-3500634-0001, Adapter, TNC to N type (for connecting the RF Cable from ODU Antenna to the IDU Terminal)
Part# HN-01-3500617-0001, IDU Mounting Strap(requires 4 each mounting bolts either M3.5 or 6/32” NOT included)
Part# HN-01-3004066-002 ODU Fixed Mount
Part# HN-01-1022994-0022 ODU Azimuth Elevation Bracket
Extended warranty options
This is the terminal Unit as supplied in the complete 9502 M2M Pack, part# HN-00-3500509-0001
Overview
HN-01-3500563-0001
9502 M2M IP Terminal UNIT ONLY
No connection charge with BGAN M2M(normal BGAN charge is 100 Kbytes)
Minimum CDRs only 1 Kbyte (normal BGAN charge is 10 Kbytes)
No charge over-the-air modem software upgrades
Exclusive airtime packages unique to the Hughes 9502
Integrated IP Watchdog to ensure “always-on” network connectivity.
No manual intervention required to recover from an outage
Auto-on/auto-context activation automatically restores power and PDP connection to itself following loss of power and/or IP connection
Remote control via SMS—remote management platform for command and control to the terminal using SMS, including configuration, debugging, and access to Web interface
Ultra-low power consumption
Transmit: < 20 W
Narrow beam w/o transmit: 3 W
Idle (regional beam): < 1 W
Off (wake on packet): < 10 mW (@ 12 Vdc)
Off (wake on packet): < 30 mW (@ 24 Vdc)
Off (GPIO control): 0 W
Relay mode passes WAN IP address to the connected RTU
Security enhancements with extended layers of embedded security options
Basic installation; no PC required
Outdoor unit (ODU) can be pole mounted
Indoor unit (IDU) is housed inside building or the remote terminal unit (RTU)
Built-in GPS receiver
Use of Internet Protocol (IP) via the BGAN satellite network
Security
o Ethernet MAC Filtering
o Administration Password
o SMS Control password
o White List for SMS control
o AT Command password lock
o SIM Personalization: Phone-to-SIM, DP SIM Lock, SP SIM Lock
Other Features:
o Single external BGAN Satellite and GPS antenna connection
o GPS module inside Indoor Unit
o 3 status LEDs
o Antenna pointing audio tone and voltage level indicator through audio jack
o SIM/USIM Slot (behind SIM door)
Tech Specs
HN-01-3500563-0001
9502 M2M IP Terminal UNIT ONLY
Electrical
Satellite Transmit Frequency: 1626.5–1660.5 MHz
Satellite Receive Frequency: 1525–1559 MHz
GPS Frequency: 1574.42–1576.42 MHz
Input Voltage: 12 Vdc/ 24 Vdc nominal
Firmware Upgrades: Over the air or local
Mechanical
IDU Weight: 1.2 Kg (2.64 lbs)
IDU Dimensions: 150 x 200 x 45mm
Environmental
Operating Temperature: -40° C to 75° C
Storage Temperature: -55° C to 75° C
Humidity: 95% RH at 40° C
IDU Water and Dust: IP-40 Compliant
Operation Interface / LED
• Function(User) Button
• LED – Power
• LED – BGAN Satellite Network
• LED – GPS Satellite
Interfaces
Ethernet connection (RJ45)
USB 1.1 connection (USB Type-B) for PC to configure terminal
(requires installation of Hughes USB driver, see www.bgan.hughes.com )
TNC-Female type RF connector on IDU
RS232 serial interface (DB9 male, DTE) to external NMEA 0183 based GNSS device (e.g., GLONASS receiver).This port cannot be used for serial data
DC input, 2-line power connector
Audio Jack, 3.5mm
3.5 mm stereo audio jack for audio tone or voltage level to assist in ODU pointing
USIM card slot behind SIM door
9502 M2M(IDU) Mounting Profiles
The IDU can be mounted using the:
IDU strap (P/N 3500617-0001) if desired Strap will require 4 each mounting bolts either M3.5 or 6/32” (not included).
The Indoor unit (IDU) can be housed inside building or NEMA 4x Enclosure / the remote terminal unit (RTU), NOT included
