Tech Specs
STARPAK-BINL-XT-1-TPM
Ruggedized Extreme Helix Antenna for GPS with Threaded Pipe Mount
Mounting Profile
Threaded Pipe Mount, to suit 25mm(1.0in) pipe.
SAT Connector: Base Exit, TNC-Male
Mechanical
Diameter: 52.72(2.075in)
Height: 133mm(5.266in)
Weight: 188g(6.6oz).
Material: 6061-T6 Aluminum Alloy base, Composite Radome, Impact, Abrasion, UV, Solvent, and Fire Retardant
Finish: Skydrol Resistant Polyurethane Enamel Base Iridite PER/ MIL-C-5441F
Environmental
Extreme Low to very High Temperature Operating Range -70° to 90°C (-95° to 194°F)
Altitude: 21.336m(70,000ft)
Vibration: 30 G’s
Leakage: Hermetically Sealed
L1 GPS TECHNICAL SPECIFICATIONS
Frequency: (1575.42 ± 15) MHz
Radiation Pattern: Hemispherical
Polarization: RHCP
VSWR: <2:1
Impedance: 50ohms
Gain(bBlc)
............................Free Space. -.. 4ft G.P.
@ 90° (ZENITH) -........... 1.1...-. 3.7
@ 10°.................-...........-0.9...-..0.0
@ 20°................ -...........-0.2...-. 2.0
@ 30°................ -........... 0.3...-. 2.0
@ 45°................ -........... 0.6...-. 1.5
@ 70°................ -........... 0.3...-. 1.3
BEAM WIDTH(3dB)......173Deg.-..155Deg
Axial Ratio: 1 to 3dB
Lightning Protection: DC Grounding
LNA OPTION FOR GPS
LNA Gain: 33dB Gain
LNA Noise Figure: 3.0dB
LNA P1dB Out: 13dBm
LNA DC Power: (2.5-2400V/<50mA
Power Handling: Passive: 10W, LNA, Active: 1Watt CW
Network, USA Federal, and Military Specifications
Manufactured in USA
Compatible with GPS L1 Satellite Networks.
DO-160D, DO-228, MIL-C-5541
MIL-E-5400, MIL-I-45208A, MIL-STD-810 and SAEJ1455
Acceptance Test Procedure: ATP-GPS-L1L2-100
MANUFACTURER COMPLIANCE
1) ISO 9001-2008: Registered through SGS
2) TSO C-144: Registered through FAA
3) Environmental: TCA/DO-160D, TSO C144
4) Lightning: DO-160F, Direct Effects, Section 23
5) Electrical: TSO C144, RTCA/DO-228/DO-254, Mil-STD-461F
6) CE: EMC Directive 89/336/EEC European Union) & 47CFR, Part 15, Subpart B (FCC)
7) EMC.Emission: EUROPEAN STANDARD EN 55022: 2006 / UNITED STATES STANDARD 47 CFR PART 15, SUBPART B
8) Immunity: EUROPEAN STANDARD EN 55024: 1998, Amendment A2: 2003
9) Pick/Place, Soldering, Circuit Boards: IPC JSTD-001D, IPC-A-610D, ESD-STD-20.20, JESD-625a, IPC-A-610C Class 3
10) Printed Circuit Board (PCB): IPC-A-600G.
11) Connectors/Adapters/Cables: MIL-PRF-39012/55339, IPC JSTD-001D
12) Stainless Steel Material for Screws: DFARS 252-225-7014/DFARS 225.872-1, and MS Standards.
13) Aluminum Material: A16061-T6 per ASTM-B-221.
14) Chem Film: Mil-C-5541F Type I Class 1A for Yellow, Type II Class 1A for Clear.
15) Black Anodize: MIL-A-8625F Type II Class II.
16) REACH Compliance: SVHC Candidate List Published by European Chemical Agency (ECHA) on Oct-28-2008 Regarding Regulation (EC) No 1907/2006 Concerning REACH
17) CAGE Code: 3CVE1; ECCN: 5A991.b.4; HTS: 8529104000
18) Country of Origin: USA.
These commodities and technology are from the United States and exportable in accordance with the export
Administration regulations. Diversion contrary to U.S. law is prohibited.
AVAILABLE COLOUR & FINISH OPTIONS
Email your alternate using colour reference, as follows:
Gloss White #17925(per USA FED-STD 595B PAINT) : Part #STARPAK-BINL-XT-1-TPM(Gloss White is supplied by default)
Lusterless Grey #36320(per USA FED-STD 595B PAINT) : Part #STARPAK-BINL-XT-2-TPM
Olive Drab Green #34094(per USA FED-STD 595B PAINT) : Part #STARPAK-BINL-XT-3-TPM
Lusterless Black #37038(per USA FED-STD 595B PAINT) : Part #STARPAK-BINL-XT-4-TPM
Desert Tan #FB23446 / 33446(FED STD 595 PAINT): Part #STARPAK-BINL-XT-5-TPM
Teflon Coated Grey(for Marines/Buoy/Extreme applications): Part #STARPAK-BINL-XT-U-TPM
CONNECTOR OPTIONS
Base Exit TNC-female by default
Email your alternate required Connector using the reference, as follows:
T: TNC, TB: TNC Bulkhead,
S: SMA, SB: SMBR,
B: BNC
M: MCX, MM: MMCX, MMR: MMCX-R
N: N/N Bulkhead
SMC or SSMC or SSMB, SSMA